How much PSI is in a basketball?

An NBA regulation ball is inflated to between 7.5 and 8.5 psi.

Can you pop a basketball?

A basketball is 9.23” in diameter, which means the surface area is 4*pi*(9.23/2)^2 = 267.64 square inches. A ball is inflated to about 8 PSI, so it would take 2141 pounds of force to crush a ball.

Can a basketball be too bouncy?

Hold the ball up to your face and slowly let it drop. If the bottom of the ball bounces up past your waist or slightly higher, then it is fully pumped. If the basketball bounces up close to the chest, it means it has too much air. If it does not bounce up to the waist, it means there is not enough air.

Will more air inside a basketball make it bounce higher?

With more air in the ball, the air starts at higher pressure and pushes back that much harder when the ball is bounced. So that short answer is that more inflated basketballs bounce better because they have more air pressure inside them. … Then use the pump to put a bit of air into the ball.

How do you convert PSI to LBS?

To convert PSI to lbs, simply multiply the pressure by the area over which the force is applied.

Why do basketballs lose air?

Basketballs tend to lose a little air when left unused and through normal use over time. In order to bounce properly, basketballs need the right amount of air pressure. … When a ball is manufactured and inflated, it is drop-tested to determine its ideal air pressure which is then printed on the ball near the hole.

THIS IS INTERESTING:  Best answer: What is the best way to record a basketball game?

How high does a basketball bounce when dropped from 5 feet?

According to international basketball rules, a basketball is properly inflated “such that when it is dropped onto the playing surface from a height of about 1.80 m measured from the bottom of the ball, it will rebound to a height, measured to the top of the ball, of not less than about 1.2 m nor more than about 1.4 m”

Playing basketball