How much concrete do I need for a basketball goal?

The recommended hole size is 16 inches in diameter and 48 inches deep. You will need eleven 80-lb bags of concrete for the installation.

How do you set a basketball goal in concrete?

How to Install a Basketball Hoop In-Ground

  1. Step 1: Choose Your Location and Call Before You Dig. …
  2. Step 2: Dig a Hole. …
  3. Step 3: Pour the Concrete. …
  4. Step 4: Raise the Pole. …
  5. Step 5: Attach the Backboard. …
  6. Step 6: Install the Rim and Net. …
  7. Step 7: Finishing Touches.

How many bags of quikrete do you need for a basketball hoop?

Goalrilla recommends purchasing 12-13 bags of Quikrete concrete mix. This concrete meets the ASTM C387 Standard Specifications for concrete. While directions state you only need 11 bags, it’s not a bad idea to have an extra bag or two on hand in the event the installation gets a little messy.

How deep should I dig for a basketball hoop?

Dig the hole.



Once you get the all-clear, grab a post hole digger and dig a hole — the edge of the hole should be, at most, 6 inches away from your playing surface. A hole that is 24 inches wide and 24 inches deep should give your post the necessary stability it needs for everyday use.

THIS IS INTERESTING:  Best answer: Will the Syracuse basketball game be on TV?

What is a good size concrete pad for basketball?

Many courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for sport courts as a permanent structure that when done right will not require any maintenance.

Should I fill my basketball pole with concrete?

As long as you have the post seated deep enough in firm ground with concrete . If you did not pour enough around the pole, putting it in it will not help.

How many bags of concrete do I need for a goaliath basketball hoop?

What Does Goalrilla Recommend? Goalrilla recommends purchasing 12-13 bags of Quikrete concrete mix. This concrete meets the ASTM C387 Standard Specifications for concrete.

How much does it cost to install an inground basketball hoop?

How much does it cost to get a basketball hoop installed? The average cost to assemble a basketball hoop is about $450 for an inground model. That includes both labor and materials. Budget about $50 to $75 for concrete, $150 to $500 for the unit, and the rest for the professional labor installers provide.

Can you move an inground basketball hoop?

It is possible to move modern in-ground hoops, but professionals are always needed. Newer in-ground hoops are designed so they can be moved. The main part of the basket is detachable from the in-ground base that is in the hardened cement.

How long does it take to install an inground basketball hoop?

On this visit, the technician will confirm with someone over the age of 18 where the Hoop should be placed. The hole will be dug, anchor kit placed and concrete poured. This visit typically takes about 90 to 120 minutes for a normal dig.

THIS IS INTERESTING:  How many 2nd round picks won NBA MVP?
Playing basketball